Trending

Influence of Cement Foaming Agent on Foam Concrete(1)

The cement foaming agent is the key to the quality of foamed concrete. A good cement foaming agent can be made into high-quality foamed concrete.…

More>>

How is the high strength of concrete achieved?

Concrete is classified as high-strength concrete based on 28-day strength. Until the 1970s, concrete with a strength of more than 40Mpa was classified as high-strength concrete.…

More>>

Analysis of the causes of concrete slump loss

Whether the cement used and the pumping agent are matched and adapted must be obtained through the adaptability test. The optimum amount of the pumping agent should be determined through the adaptability test with the cement cementitious material.…

More>>

Concrete Superplasticizer PCE Powder

Polycarboxylic acid superplasticizers are used as high range superplasticizers in high performance concrete.Water content:3.6%pH:8Total alkali:5.8%Gas content:3.1%…

More>>

What are CLC Concrete Advantages?

Foamed concrete has good physical properties, combining insulation and electrical resistance. It has many benefits that make it one of the best alternatives to building materials.…

More>>

Types of High-efficient Water Reducer

This article will talk about different types of high-efficient water reducers and the mechanism of superplasticizers.…

More>>

Effect of Concrete Components on the Performance of High-efficient Water Reducing Agent

Concrete is a mixture of a graded aggregate, sand, water, and cement. It is necessary to study the influence of concrete components on the effect of the high-efficient superplasticizer in order to give full play to their due effect.…

More>>

Foam Concrete Advantages and Disadvantages

Foam concrete is a lightweight, easy-to-use, and easy-to-finish material. For home improvement projects, such as building decks or other areas on the property, foam concrete may be a wise choice.…

More>>

What are the effects of admixtures on foam concrete

To study the problem of collapse mode cracking in the cast-in-place foam concrete wall, using ordinary Portland cement, fly ash, and self-made composite foaming agent as the primary raw materials, the admixtures (there are two kinds of admixtures) we…

More>>

How to avoid deformation and cracking of foamed concrete materials

Foam concrete is prone to cracking during maintenance, mainly caused by unscientific construction and maintenance of the proportioning. Luchuang has a series of solutions. In the years of construction, Luchuang has accurate material proportions for d…

More>>

6 problems to pay attention to before and after the construction of foamed concrete

he compatibility of cement foaming agents and the foaming machine is the first consideration. Because there is a problem with compatibility between cement foaming agent and cement foaming machine.…

More>>

The solution to the collapse of foam concrete

The common problems of foamed concrete are bubbling, cracking, collapse, shrinkage, and other phenomena. To treat these phenomena, the proper medicine can be found, and the cause can be effectively solved.…

More>>

Related news

Calcium stearate emulsion, 50%

TRUNNANO is a reliable supplier for calcium stearate emulsion and calcium stearate powder.…

More>>

Polyglycol laurate CAS 141-20-8

TRUNNANO is a reliable supplier for Polyglycol laurate CAS 141-20-8.…

More>>

Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceed…

More>>

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder