Answers

  • 0
  • 0

Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



According to statistics from China Chemical and Physical Power Supply Industry Association, China's export volume and export value of lithium-ion batteries have continued to increase. In 2021, China's exports of lithium-ion batteries were 3.428 billion, with a year-on-year growth of 54.34%. The export of lithium-ion batteries was 28.428 billion DOLLARS, up 78.34% year on year. 

From the battery export destination, so far. China's lithium-ion batteries are mainly exported to the Asia Pacific and the United States and other places. In terms of price, the price of HPMC, led by lithium-ion batteries, is expected to expand globally. 

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceeds 40000 MPa•s, the water retention increases limited with the increase of viscosity. The higher the viscosity, the larger the molecular weight of HPMC, and the corresponding decrease in solubility. It will not improve the water retention of mortar, but it will have a negative impact on strength and workability. Comprehensive consideration, it is more appropriate to use cellulose ether with a viscosity of 40000 MPa•s in the cement mortar.


As the HPMC particles gradually become finer, the water retention of the mortar is also improved to a certain extent. Fineness affects the solubility of HPMC. Coarse HPMC dissolves very slowly in water and should not be used in dry mix mortars. In dry-mix mortar, HPMC is dispersed between aggregates, fine fillers and cementitious materials such as cement, and only a fine enough powder can prevent it from caking when mixed with water. When HPMC is added with water to dissolve the agglomerates, it is difficult to re-disperse and dissolve. HPMC with coarse particle size is not only wasteful, but also reduces the local strength of the mortar. When such dry-mixed mortar is used in large-scale construction, the curing speed of the local mortar may be significantly reduced, which may cause uneven hydration of the cementitious material. of cracking. For mechanically constructed spray mortars, due to the shorter mixing time, the requirements for the fineness of HPMC are higher. Therefore, after comprehensive consideration, the particle size of cellulose ether used for cement mortar should be less than 80 μm.


It can be seen that HPMC is a high-efficiency water-retaining agent for dry-mixed mortar, which reduces the bleeding rate and stratification of the mortar, and improves the cohesion and sag resistance of the mortar. Although HPMC slightly reduces the flexural and compressive strength of mortar, it can significantly improve the tensile strength and bond strength of mortar. In addition, HPMC can effectively inhibit the formation of mortar plastic cracks and reduce the mortar plastic cracking index. The water retention of mortar increases with the increase of HPMC viscosity, and when the viscosity exceeds 40000MPa•s, the water retention does not increase significantly. The fineness of HPMC also has a certain influence on the water retention rate of the mortar. When the particles are finer, the water retention rate of the mortar increases. The particle size of HPMC usually used for cement mortar should be less than 80μm.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality HPMC, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com




With the outbreak of the Russia-Ukraine conflict, the market is increasingly worried about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the HPMC may continue to rise.

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

TRUNNANO is a reliable supplier for high purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…