High Purity Telluride Copper CuTe Powder Cas 12019-23-7, 99.9%

Telluride (Cupper(II) Telluride) is a dark powder that is very stable when stored at room temperatures. Particle Size: -80mesh and -100mesh
Purity: 99.99%

Telluride Copper CoTe Powder -
Telluride copper also known as alloys C145, Copper tellurium (also called C15400),145 semi-shared tellurium and TEU- is a copper-based alloy containing different amounts of tellurium. Tellurium usually has a content of 0.4-0.7%, and phosphorus can be anywhere from 0.004-1.12 percent.

Copper tellurium can be described as an alloy made of tellurium, copper, and other elements. Copper tellurium containing 0.4-0.7% tellurium has good machinability. The master alloy is telluride copper, which contains half the amount of copper and half the percent of tellurium.

Tellurium Copper has the following properties: atmospheric corrosion resistance; high temperature and conductivity hydrogen embedment (i.e. caused by the introduction or diffusion of hydrogen fracturing, weaken), 65-130HV hardness; good formability (used to cold and hot-forming processes), 85-90% machinability rating (if no cutting brass is used for 100), suitable only for welding and brazing.

It is a copper alloy with excellent machinability and high electrical and thermal conductivity. Copper tellurium alloy is known for having the best cutting performance. It is forged, extruded, drawn, blanked, and can also be cast. The tellurium copper alloy can be made into plate, sheets, rods, wires, tubes, and many other forms. It is ideal for industrial use due to its properties. If you are interested in Telluride Copper CuTe Powder, please send us an inquiry.

Telluride copper cuTe powder performance:

Copper telluride can be described as a chemical substance having the molecular structure CuTe. Copper telluride can be described as a dark powder. It is very stable in ambient air and at room temperatures. Copper telluride, an inorganic mineral that is important for storing copper and tellurium resources, can also be stored as a great way to do so. Cu is used to replace Te in H2SO4 solutions. Copper telluride can be produced by heating Te with water. It separates tellurium form many other metals and gives off a very high level of tellurium. Te can either be + 4 or 6 valences when it replaces Te. These can all generate Cu 2 Te. This is because Te isn't affected by the tellurium valence. Cu telluride, when exposed to an acid or base, can react chemically with these acids and bases. This is the key for seperating and recovering Cu and T. To put it simply, copper and tellurium combine at a higher temperature in order to separate the tellurium.

Telluride copper cuTe powder specification :

Room temperature stable at room temperature, black crystal powder. Copper telluride, an important organic material that stores large amounts of tellurium as well as copper resources, is also useful.

Copper Telluride Certificate (ppm).
Purity Zn Ag Cu Al Mg Ni Pb Sn Se Si Cd Fe As
>99.99% <=5 <=4 <=5 <=3 <=5 <=5 <=5 <=5 <=6 <=4 <=8 <=8 <=5

You can order different products depending on your requirements.

How does Telluride Copper CopperCuTe Powder be made?
These steps are part of a preparation process for copper tellurium alloys:
1. After mixing high-purity copper and high purity tellurium according the required ratios, or after creating layers of high pure copper and high quality tellurium respectively, they are put in a graphitecrucible. The graphitecrucible is then sealed, after which the protective gas in the graphitecrucible has been replaced with air.
2. The graphite crucible can be placed in a synth furnace. After it is closed, the oxygen from the furnace chamber is transferred into the protective gases.
3. To ensure that the furnace is at 1.04.5MPa, add protective gas. When the furnace is heated, its temperature rises to normal within 60 minutes. It can reach 1200 1450 in about 90 min. The temperature of the furnace drops after 2 h.
4. After the temperature has been lowered to under 100°F, the protective gas is removed from the synthesis oven to bring the pressure to normal. Finally, the furnace can be opened for the production of copper tellurium alloy ingot.

Telluride Copper Copper CuTe Powder -
Tellurium copper alloy is used primarily for high conductivity, high resistance to corrosion of precision electronic parts and electric components, advanced mechanical parts and electrical parts.
The tellurium copper alloy is available in a range of profile options, including sheet, plate, rod, wire and tube.
Indicators for contact material of charging piles have improved with the increased promotion of renewable energy vehicles and construction of charging pilings. Due to its high electrical qualities and ease of processing, copper tellurium can be successfully used as a high-current connector for new energy vehicle.


Packing & Shipping Telluride copper cuTe powder -
There are many options for packing depending on Telluride copper cuTe powder.
Telluride copper cuTe powder packaging: vacuum packaging, 100g to 500g or 1kg/bag 25kg/barrel and as per your request
Shipping to Telluride Copper CuTe Powder: can be sent out by Sea, Air, or Express as soon after payment receipt.

Cuprous Telluride Powder Properties

Other Titles Telluroxopper and Copper monotelluride.
Telluride made of Copper(2+),
12019-23-7
Compound Formula CuTe
Molecular Weight 191.15
Appearance Crystalline
Melting Point 1125 degC (607 degF)
Solubility In Water N/A
Density 7.1 g/cm3
Purity 99.00%
Tiny -80mesh, -100mesh
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Mass 192.836
Monoisotopic 192.836

Cuprous Telluride Pulp Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

NEXT Telluride Powder

Our Latest Products

High Purity Cuprous Telluride Powder Cu2Te Cas 12019-52-2,99.99%

Cuprous Telluride is a molecular formula Cu2Te that's often used to make elemental tellurium.Particle Size: -80mesh and -100mesh Purity: 99.99% Information about Cuprous Telluride Cu2Te Powder - Cuprous Telluride (an inorganic compound with Cu2T…

High Quality Calcium Dodecyl Stearate

Calcium dodecylstearate, a chemical substance that looks like a needle, is flaky. It is not soluble or soluble with water. However, it can be dissolved in alcohol, ether, and chloroform. It can be used in the production of grease as well as for organ…

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Tungsten carbide, a mixture of tungsten (and carbon), is an organic compound. The molecular formula of WC is 195.85 and the molecular mass is 195.85.Particle Size: 325mesh Purity: 99% About Tungsten Carbide WC Powder: Tungsten carbide is made…

0086-0379-64280201 brad@ihpa.net skype whatsapp