Tin Telluride (IV-VII compound semiconductor material) is made of IVA element Sn, and VIA component TE. SnTe is its molecular formula.
Particle Size: -80mesh and -100mesh
Purity: 99.99%
about Tin telluride SNTE
Tin Telluride (IV-VI) compound semiconductor material is made of IVA element Sn, VIA element T. The molecular formula of SNTE. It is an inverse transmitting type and the banned bandwidth for this frequency is 0.60 eV.
Tin Telluride can be described as a semiconductor substance. A sodium chloride structure and ionic crystals have a covalent bond component. Density 6.48g / cm3, melting 780 degrees Celsius. The material is made using an epitaxial and straight pull methods.
Tin Telluride is often alloyed with lead tiny lisuride to create the infrared detection material. Tin Telluride forms an external semiconductor, the p type (external semiconductor), due to the presence of tin in its air. This superconductor is low-temperature.
Tin Telluride can be found in all three phases of the crystal. Low temperatures result in a concentration of less than 1.5x10-20 cm-3 for the aperture carrier. Also known as the "a-SNET" phase, it is found in the diamond stage. The NaCl samples are labelled b-SNE. Tin TELLURIDE, which is found at room temperature and atmospheric press, can be detected in NaCl samples. While bSNTE is transformed to gSNTE and orthogonal phases, the spatial group PNMA also contains g-SNTE. This phase change causes an increase in 11%, and the resistance to the new g–SNET is increased by 360%. Teti, a thermoelectric substance, is also known as Teti. Research suggests that the n-type performance might be very good. If you are interested in buying Tin telluride, SnTe powder wholesale, please send us an inquiry.
Tin telluride SnTe powder features :
Keep the mixture at room temperature and low pressure. Use caution around open flames, heat, and light. Use semiconductor-based water to dissolve.
Description of Tin telluride or SnTe powder:
Product
|
Purity
|
APS
|
The color of the sky
|
The Shape
|
Density (g/mL 25, 25)
|
Melting Point
|
Crystal Structure
|
Tr-SnTe
|
99.99%-99.9999%
|
100mesh
|
Gray cubic crystal
|
powder,granule
Block
|
6.5
|
790degC
|
Cubic
|
You can order different products depending on your requirements.
How does Tin telluride snTe be produced?
1. The high-purity, pure tin, and the ruthenium according to their chemical measurement ratio were weighed. They were then placed in a quartz ampoule. After placing the ampoule into a furnace to warm (about 50°C / h) and heating for 72 hours, seal the container under high vacuum (10-5 Pa).
2. The high-purity, pure tin, and the ruthenium as per the chemical measurements ratio are weighed. Seal the container under high vacuum (10-5 Pa). Place the ampoule into a cold oven, quickly heat (around 200 degrees C/h of 810 degree C), and let cool for about 15 hours.
3. As the electrolytic cells, use 1 L of the round-neck three-neck flask. The cathode measures 5 mm diameter by 7 cm in length and is 99.99% pure. The anode is a cylindrical high purity bottle. You should seal the glass and metal. This port allows you to connect and add the mechanical vacuum pump. The magnetic stirrer inside the bottle is placed into the botulfluoroethylene and stirred during electrolysis. An NH4AC–HAC buffer solution is used. To bring the pH up to 4.5, you can add 500 ml (1 mol / L) ammonia. To start electrolysis, you must place the electrode in the vacuum. After 30 minutes, stir the magnet force for 30 seconds. In the anode, SnTe is precipitated in Sn2 + solution.
4. You can also add the electrolyte to the anode. The metal salt solution (such a chloride) can be droppedwise and is used in 101.325kPa pure Argon with Platinum.
The electrolyte's precipitate is heated in an argon environment to encourage precipitation. You must not let crystallization be made in the air. After crystallization, remove it from air. The crystals can then be washed, centrifuged, dried at 120 degrees C, for 4 hours, and dried with an argon flow.
Application Tin Telluride SnTe Dust:
Use high-purity inorganics in electronics for display, screen, and catalyst.
Packing & Shipping Tin telluride SnTe powder -
We offer many packing options that are dependent on Tin telluride quantity.
Tin telluride powder packaging: vacuum packaging, 100g to 500g or 1kg/bag for 25kg/barrel or upon your request
Tin telluride and SnTe powder shipping can be shipped by sea, air or express, once the payment has been received.