Tin disulfide, also known as SnS2, is an inorganic chemical compound. The yellow hexagonal flake has a CdI2 crystalline structure. It is barely soluble. Purity: 99.99%
Particle size : 100mesh

Stannic Sulfide SnS2:
Tin disulfide If you want to know more about a specific topic, please click on the link. stannic sulfide Is an inorganic compound. Stannic sulfide Formula It is SnS2. It is a hexagonal yellow flakes with a CdI2 crystalline structure. It is only a little soluble but soluble is aqua regia or hot alkali, as well as sodium sulfide. Stannic sulphide It is used to make gold paint.
Tin(IV) sulfide The crystallization occurs in the form cadmium iodide, with Sn(IV), located in a "pore octahedral" defined as six sulfide centres. It appears naturally as the rare mineral, montmorillonite. The bandgap is 2.2eV and it can be used for semiconductor materials.
SnS2 consists of a n-type material with a CdI2 hexagonal structure. Tin disulfide SnS2 This is a layered metal-dihalide semiconductor that has a crystal and chemical structure similar to the molybdenum dihalide (MoS2). Sn is sandwiched by two Slayers, which have strong covalent ties, while the monolayer is kept together with weak van der Waals forces. If the van der Waals weak force is overcome through physical or chemical peeling then each layer will easily break.
SnS2 can be used to make photovoltaic solar panels, FETs and sensors.
Tin disulfide has an acidic sulfuric nature. It can be dissolved by aqua regia, hot alkali, concentrated hydrochloric, but not in water or nitric acids. It can be dissolved by ammonium-sulfide.

Send an inquiry for the latest news stannic sulfide price You can also contact us if you have any questions. Stannic Sulfide SnS2 - Powder Bulk discounts are available.

Stannic Sulfide, CAS 1314-95-0:
Product Name stannic sulfide ; tin sulfide ; stannic sulphide
Stannic Sulfide formulation : SnS2
Stannic Sulfide colour: yellow
Stannic Sulfide particles size: 100mesh
Stannic Sulfide purity 99.99%
Stannic Sulfide appearance: yellow powder
Stannic Sulfide density : 4.5g/cm3
Stannic Sulfide:
Under high temperature and pressure, 1mol each of high purity tin and sulfur is vacuum melted. The resulting melted metals are then treated.

Stannic Sulfide:

SnS2	Zn	Ag	Curiosity	Ca	Al	Mg	You can also find us on Twitter @Ni	Pb	As you can see,
99.99%	<=8ppm	<=8ppm	<=2ppm	<=5ppm	<=4ppm	<=6ppm	<=5ppm	<=7ppm	<=4.5ppm

How do you pronounce Stannic Sulfide SnS2 Poudre produced?
The acid solution of Tin Tetrachloride can be treated with hydrogen sulfide in order to obtain a bright yellow tin diulfide.
Selenium disulfide may also be produced by sulfide reacting with a tin-chloride solution.
By combining tin, sulfur and iodine in presence of iodine, a tin-sulfur disulfide is obtained. The reaction needs to be heated.
Sn + S = SnS2
One method is to dissolve the tin-IV salt in hydrogen sulfide.

Stannic Sulfide SnS2 - Applications :
Tin disulfide, or SnS2, is a van der Waals semiconductor material that has excellent photoelectric properties. Material is non-toxic, environment friendly, high in content, and easy to make. The properties of tinsulfide include semiconductors. These are used for laboratory research, experiments and development. They are also highly active on the market.
Tin disulfide has an n-type crystal structure of hexagonal CdI2 with a large bandgap (about 2.35eV). It is a semiconductor material that can be used to make solar cell materials, anode materials for Lithium Chemicalbook cells and other applications.
As tin diulfide is environmentally safe, has a similar bandgap to silicon and has an absorption coefficient of high, it makes a great absorber for solar cells. Experts from both home and abroad have been researching it for many years. This material can be used to manufacture and imitate gold. Use for paints etc.
Single-layer SnS2 can be made by stripping mechanically or with liquids from tin-disulfide-single-crystals.
Tin disulfide can be used for liquid chemical exfoliation in order to produce SnS2 particles and nanosheets with as few as a couple of layers.
Tin disulfide exhibits high surface activity and a high level of sensitivity. SnS2 is also used as a single-layer, or multi-layer, ultra-thin SnS2 film, made from powder and bulk crystals. It has been used to make light emitters and gas sensors. Thermoelectric Photovoltaic, other fields and equipment for energy storage, like the application of Lithium-ion Batteries.

Stannic Sulfide SnS2: Storage Conditions
Stannic Sulfide SnS2 is affected by damp reunion, which will have an adverse effect on the powder's dispersion and use. Therefore, Stannic Sulfide SnS2 must be packed in vacuum and kept in a dry and cool room. SnS2 Powder should not be exposed to stress.

Stannic sulfide powder SnS2 is packed and shipped in the following ways:
Stannic Sulfide SnS2 is available in a variety of different packings.
Stannic Sulfide SnS2 POWDER packing: Vacuum packaging, 100g/bag, 500g/bag, 1kg/bag. 25kg/barrel. Or as per your request.
Stannic Sulfide SnS2 Poudre powder shipping:could ship out by sea, by air or by express as soon as payment is received.


Technology Co. Ltd., () is an established global chemical supplier and manufacturer, with over 12 years' experience in providing high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D printing materials, etc.
Looking for high quality stannic sulfur powder Send us an email or call to make an appointment. ( brad@ihpa.net )

Stannic Sulfide Properties
Alternative Names	Tin(IV) sulfide, tin disulfide, tin dissulphide, tin sulfide, Tin(4+), SnS2 powder
CAS Number	1315-01-1
Compound Formula	SnS2
Molecular Mass	182.84
Appearance	Gold Yellow Powder
Melting Point	N/A
Boiling Point	600
Density	4.5 g/cm3
Solubility In H2O	Insoluble
Exact Number	183.846337
Stannic Sulfide Health & Safety Information
Sign Word	Warning
Hazard Statements	H315-H319-H335
Hazard Codes	Xi
Risk Codes	N/A
Safety Declarations	N/A
Transport Information	NONH for All Transport Modes

Inquiry us