High Quality Water-Based Boron Nitride Emulsion

Water-Based Boron Nitride Emulsion Water Based Boron Nitride Coating. Water-based coatings have excellent lubrication properties and are easy to remove. The high-temperature bonding process and matching high purity BN powder are what create this coating. The combination of high-purity boron oxide particles with inorganic binding creates a superior formulation that can produce a fluid, continuous coating on the surfaces. This allows for excellent adhesion. Also known as the boron nutride lubricant and boron coating.
Boron Nitride coating, an inert organic high-temperature grease material that doesn't bond with or infiltrate molten iron, is an inert lubricating material. The coating protects ceramic vessels and other refractory materials from direct contact with the molten zinc alloy, magnesium, or zinc alloy. This can greatly enhance their usefulness. Life.
Hexagonal boron Nitride suspension is highly thermally conductive. You can apply it directly to any hot surface, regardless of whether or not you have impregnated molten metallic. It does not react with metal, glass, or any molten salt and remains stable at higher temperatures. Boron nitride coateds can be applied in liquid form for easy brushing. The concentration of the coatings for spraying or dipping can also be adjusted with water. If you are interested in purchasing Water-Based Boron Nitride Emulsion, please send us an inquiry.

Properties Water-Based Boron Nitride Emulsion:
Water-based Boron Nitride Emulsion does not pollute the environment or cause harm to human health. Non-toxic, no odor. Boron Nitride coating is heat resistant up to 400-1700. This coating is water resistant, resists salt spray, organic solvents, and has a long service life.

How Water Based Nitride Emulsion is made?
Use a gentle brush to apply the paint. You can dilute the paint with distilled water if it is necessary to discolor it.
Spraying: A spray gun, or another similar tool with a pressure between 50-60psi (0.335-0.42 MPa) is the best method. Mix the paint well before spraying. Use distilled water to dilute the paint if it is necessary.
Dip coating technique: Use distilled water to dilute the solution if necessary. After two dips it should be dried for forty minutes at 80 degrees Celsius.

Water Based Boron Nitride Emulsion
The boron nitride-emulsions are widely used in the aerospace, military, and petroleum industries. They can be used for high-temperature steam pipes, chimney flues, heat exchangers and furnaces.
Boron Nitride Emulsion is suitable for use in the following fields: aluminum, magnesium, zinc, other alloy castings, gravity/low-pressure cast, forging, powdermetallurgy, and others
Boron Nitride Emulsion can be used on the casting table, distribution, launder and filter plates. It also protects molds from corrosion. life;
Fine impurities are prevented from getting into the molten material by the boron-nitride-emulsion. It greatly improves the product's quality and reduces the risk of secondary pollution.
Boron nitride Emulsion provides excellent lubricity in high temperature environments and has an exceptional anti-oxidation capability. Even at extreme high temperatures it maintains its unique non-stick, antisticking, anti-corrosion and antioxidation properties.
Other than protecting various refractory material, boron-nitride-emulsions have outstanding anti-chemical and antiadhesion properties in other fields.
It is impossible for most molten and salt metals to make the boron nutride emulsion viscous.
Boron nitride Emulsion resists molten and light-metal scum.
Very good separation/unusual color in boron-nitride Emulsion.
The Boron Nitride Emulsion is used to extract solidified metal.

Technical Information of Water-Based Boron Nitride Emulsion: