High Quality Stearic Acid Amide Emulsion
A white stearic acidamide-amide emulsion can be used. The product is environmentally friendly, nontoxic, polluting and non-hazardous. It can be used in paints, inks, and leather coatings.
Particle Size: D50: =2um
Stearic Acid Amide Emulsion:
The properties of Stearic Acid Amide Emulsion
Stearic acidamide amide, a white emulsion is safe and healthy. The product can be easily dispersed in water, has low viscosity and is highly dispersible.
Stearamide may also be known as stearamide. It has the chemical formula C17H35CONH2. Stearic acidamideamide is insoluble when mixed with water. It can be slightly soluble at room temperature in organic solvents. It is able to improve dispersion effects and the affinity of dyes.
Excellent adhesion and lubricity. No moisture absorption. You can mix it with paraffin wax. Ammonium salt is created by the reaction between stearic and ammonia. It then gets dehydrated to get the final product. It is a good, smooth product that has low hygroscopicity. Use it as a pigment ink mixed agent, surface-active and fiber oil agent.
The use of stearamide in thermal paper coatings can serve as both a sensor and slip agent, and as an anti-blocking and slip agent for polyolefin films. Stearates can be made from fatty saturated linear monocarboxylic oils derived naturally from vegetable oil. Send an inquiry for the most current price to purchase bulk Stearic Acid Amide Emulsion.
A white stearic acidamide-amide emulsion can be used. The product is environmentally friendly, safe, clean, and doesn't cause any harm. It can be easily dispersed in water.
Technical Information of Stearic Acid Amide Emulsion:
Particle Size D50
Shipping and Packing of Stearic Acid Amide Emulsion
How does Stearic Acid Amide Emulsion get made?
Insoluble in water, stearic Acid amide must be prepared using emulsifiers. Even after adding dispersant, water-based stearic Acid amide emulsion is still not able to disperse well. Additionally, it can easily precipitate. Long-term storage may result in flocculation. Additionally, high-speed stirring is required and grinding is done under heat to make the aqueous solid stearic acids amide. The production process can be complicated.
First, add the water-based water-basedstearic Acid amide to water. Next stir for 60 min at 2500r/min. Then add defoamer (and preservative) and continue stirring for another 40 min. This will produce an aqueous solution of stearic Acid amide. This prepared water-based, stearic-acid amide-amide emulsion contains 41.7% solids. It has a viscosity level of 146 mPa*S. After 30 minutes of centrifugation at 20000r/min, the water-based, stearic-acid amide-amide emulsion can be placed at 20-25C for three months with no flocculation or delamination.
Applications for Stearic Acid Amide Emulsion:
Stearamide can be used to lubricate and release molds for polyvinylchloride, polystyrene, and other plastics.
Stearamide is often used with oleamide-erucamide as an antiblocking agent to polyolefin film films.
Stearamide, unlike the common inorganic anti-blocking agents (silica), does not affect the transparency. Stearamide is used to release synthetic rubber, natural rubber, and as a lubricant for rubber compounds. This gives the product a high Gloss.
The sensitizer of thermal paper is made from stearic Acid amide Ultrafine Aqueous Dispersion.
The ultra-fine, water-based, stearic Acid amide dispersion can be used for textile waterproofing agents, fabric softeners, antistatic agents, wetting agents, and fixing aids.
You can choose from many kinds of packing depending on your stearic Acid amide Emulsion Quantity.
Packaging of Stearic Acid amide Emulsion:
Emulsion shipment of Stearic Acidamide Adamide
Could be sent by sea or air as soon as possible after receipt of payment.
Stearic Acid Amide Emulsion, Stearic Acid supplier, Stearic Acid storage
PREVIOUS Stearic Acid Series