High Purity Magnesium Silicide Mg2Si Powder CAS 22831-39-6, 99%

Magnesium Silicide is the most stable component in the Mg/Si binary. It is known for its high melting point and hardness as well as high elastic modulus. Purity: 99%
Particle Size: 5-10um

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is an organic compound that is made up of magnesium and silica. The chemical formula for this inorganic compound is Mg2Si with a molecular mass of 76.71. Cubic crystal in cyan, or light purple. The melting point at 1102°C is the relative density at 1.94.
Magnesium silicide does not dissolve in cold water but will degrade in hot. The silica can be totally decomposed by heating it up to 1200°C under hydrogen flow. For the alkali solution, it is stable. Hydrogen and silane can be produced by their decomposition. Mg2Si, the stable compound in the MG-Si binary, has a high melt point, high hardness. High-elastic modus properties make it a narrow-bandgap ntype semiconductor material. These materials are used to manufacture optoelectronic and energy devices as well as semiconductors. Mg2Si has an entire structure that belongs to the facial cube lattice. Its space group is FM3M and its group number is 225. The lattice constant A = 0.6391nm. The crystal structure shows that each Si atom is in (0, 0, 0, 0), which forms a facial cubic structure of a long A. The MG atom, located in the (0.25, 0.25, 0.25) location, is found at the middle Si atom-filled tetrahedron, forming an unfilial, edge-length structure A / 2. Magnesium Silicide is a narrow-gap semiconductor. While the conductivity of the crystals is n-type, it can also be doped with Ag or Ga or Sn and possibly Li (in high dose). Send an inquiry for the most current price to purchase Magnesium Silicide Sg2Si Powder bulk.

Magnesium Silicide, Mg2Si powder:
Magnesium silicide (CAS 22833-39-6) powder has a high melting temperature, good corrosion resistance, and high oxidation resistivity.

Technical Parameter Magnesium Silicide Mg2Si powder:
Name of Product MF Purity Particle Size Melting Point Density The color of the sky
Silicide magnesium Mg2Si 99% 5-10um 1102 1.94 g/cm3 black

Chemical composition of Magnesium Silicide Powder Mg2Si:
Mg2Si Mg Si C P Fe S
>99% Balance 36% 0.09% 0.02% 0.25% 0.005%

It is simple. Silicide for Magnesium Mg2Si Powder produced?
Silica powder has a particle size of 180. Magnesium powder is 100g. Research has revealed that silica magnesium reacts at 600°C for 4 hours, with a cooling rate of 10°C/min. This results in optimum product quality and an increase of 98% of magnesium silicide.

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is used often to create aluminum alloys. This contains around 1.5% magnesium sulicide.
To produce a series of aluminum alloys, 6000 series with as much as 1.5% Mg2Si magnesium silicide can be used. It is possible to harden the alloy of this group and create the Guinier PRESTON zone or a very fine precipitate. This will increase the strength of your alloy.
The principal electronic use of MG2Si's MG2Si can be found in its thermoelectric generator.
Magnesium silicide primarily is used for the production of other silicides.
It is used for the production of MgSin2 powder. It is useful in the production of non-oxide clay powder.
An byproduct of silicide magnesium silicide

Shipping Magnesium Silicide Ng2Si powder:
There are many packing options available that depend on the amount of magnesium silicide, Mg2Si.
Packing of Magnesium silicide, Mg2Si powder: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Delivery of magnesium silicide Mg2Si in powder form: After receipt of payment, items may be shipped by sea, air or express.

Magnesium Silicide Properties

Other Titles dimagnesium silicide, dimagnesium monisilicide,
MgSi, Mg2Si powder
22831-39-6
Compound Formula Mg2Si
Molecular Weight 76.7
Appearance Gray Black Powder
Melting Point N/A
Boiling Point N/A
Density 1.94 g/cm3
Solubility of H2O N/A
Exact 75.94701

Magnesium Siicide Safety and Health Information

signal word Danger
Hazard Statements H261
Hazard Codes F
Risk Codes 14/15
Safety statements N/A
Transport Information UN 2624 4.3/PG2

Inquiry us

NEXT Silicide Powder

Our Latest Products

High Quality Water-Based Boron Nitride Emulsion

A water-based, organic high-temperature oil lubricating substance is the water-based Boron Nitride Emulsion. It doesn't bond with or infiltrate molten metallic liquids and it can protect surfaces of refractory material or ceramic utensils. Water-Ba…

High Purity Calcium Silicide CaSi2 Powder CAS 12013-56-8, 99%

Calcium silicide (also known as calcium diilicide) is a chemical formula that is CaSi2. CaSi2 calcium silicide powder is used to make steelmaking deoxidation. Purity: 99%Particle Size: 5-10um Calcium Silicide CaSi2 Pulp : Calcium silicide (als…

High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

Chemical formula: Fe2O3. Iron oxide Powder amorphous, reddish or deep-red. Water insoluble, but soluble and soluble in both sulfuric acid (HCL) and hydrochloric Acid. It may be slightly soluble or insoluble in nitric acids. Purity: 99.5%Particle size…

0086-0379-64280201 brad@ihpa.net skype whatsapp