Selenide Powder

  • 0
  • 0

High Purity Zinc Selenide ZnSe Powder CAS 1315-09-9, 99.9%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

Zinc selenide is a chemical compound with the formula ZnSe. It's a yellow-colored solid compound that is used extensively in medicine, laser, and infrared nightsight. Particle Size: Granules, 100mesh
Purity: 99.9%

Zinc Selenide ZnSe Powder
Zinc Selenide (Zinc Selenide), an inorganic compound, has the molecular structure ZnSe with a molecularweight of 144.35. It comes in a yellow cubic crystal form. The relative density is 5.65. Sublimation. Transmittance is greater than 60% for infrared lights with wavelengths below 15 mm. You can see light rapidly turning red, even if it's inhaled for a long period of time. Zinc selenide, while insoluble in water and reacts with acids to create toxic hydrogen selenide gaz.
Zinc selenide is composed of zinc and selenium. It's an intrinsic semiconductor, with a bandgap at 25degC (77.5degF) of approximately 2.70eV.
ZnSe can be described as a broadband semiconductor belonging to the IIVI semiconductor family. It is difficult but possible. P-type doping, however, is easier and can be done by adding gallium.
Zinc selenide consists of zinc II – VI compound semiconductor material. If heated to a temperature within the atmosphere, they will become carbon dioxide selenium or zinc oxide. However, their forbidden bandwidth is only 2.6 eV. The compound semiconductor is capable of emitting visible light from yellow materials to blue. If you are interested in Zinc Selenide ZnSe Powder, please send us an inquiry.

Zinc Selenide ZnSe Pulp - Properties
Zinc selenide, with the chemical formula ZnSe has a molecularweight of 144.33. This solid, light-colored compound is insoluble when dissolved in water. You can make it by the reaction between zinc chloride and zinc sulfate. With hydrogen selenide. Useful in laser medicine, astronomy, night vision, and other fields. A yellow transparent, polycrystalline zinc selenide substance has a crystal size of 70mm. It also has a light transmission range between 0.5-15 mm. Chemical vapor deposition is a chemical-vapor deposition method that has virtually zero impurity absorption and a very low scattering loss. This material is the best choice to make optical devices using high-power CO2 lasers because of its low absorption at 10.6mm wavelength. Additionally, this material is used frequently in other optical systems throughout its light transmission spectrum.
Specification Zinc Selenide Ze Powder -
Zinc Selenide, MF ZnSe
Zinc SelenideColor light yellow
Zinc Selenide Weight 144
Zinc SelenideMelting point 1100
Zinc SelenideCAS 1315-09-9
Zinc SelenideEINECS Nr. 215-259-7
Zinc Selenide density 5.42 g/cm3

It is simple. Zinc Selenide ZnSe Powder produced?
Zinc selenide may be made by heating ZnSO4 solution and H2Se, or ZnO and ZnS together and heating them to 800. This is used to catalyze the organic synthesis from isopropanol of acetone. A phosphatphor is an organic compound which contains Cd but has a low amount of Zn.
1. A dilute solution of zinc sulfurate, buffered by ammoniumacetate is then added to the saturated H2Se solution. H2Se gas is also added (formulated through the reaction between Al2Se3 & dilute Hydrochloric acid). Heat the precipitated vessel in a steambath. After that, add H2Se gas diluted with N2 or H2 to the solution. Zinc salt solutions that are too concentrated or too quickly introduced will cause white precipitate to form. This will make it difficult for the ZnSe to become yellow. After the separation, it was first washed in boiled ammonia then washed again with methanol. After the ZnSe precipitates had been cleaned, they were dried first in a vacuum dryer with CaCl2. Next, it was dried at 120° C in a dryer that has P2O5.
Zinc selenide reacts very strongly to moisture. The dried product should be placed inside a glass tube and heated to 600 degrees Celsius in H2 or H2Se to get rid of the oxygen.
2. The mixture of four grams zinc oxide, two-thirds of a cup zinc sulfide, and six grams selenium were placed inside a quartz crucible with the lid. After heating at 800 for 15 min, the ZnSe product was obtained.

Applicaciones Zinc Selenide ZnSe Powder
ZnSe is produced in melt with excess inert gases pressure (usually Ar). ZnSe is ideal for use in 10.6 mm wavelength CO2 laser optics as it does not absorb or include any inclusions. ZnSe therefore is an infrared important material. It can transmit wavelengths of 0.45 to 21.5 millimeters. Green had a refractive Index of 550 nm, while the LWIR refractive Index was 10.6 mm. ZnSe can also be used for:
1. ZnSe is a good choice for both fluorescent materials and semiconductor dopants.
2. ZnSe has a wide range of uses in medicine, laser, and infrared.
3. Znse is used in the manufacture of infrared transmissible materials and optical instruments
4. ZnSe is used for the formation of an IIVI LED and diode-laser. It emits blue light.
Infrared laser gain medium for Cr Doped ZnSe, (ZnSe : Cr), has an emission wavelength approximately 2.4 mm.
5. A scintillator with 640nm wavelength, called Activated ZnSe (ZnSe(TE),) which can be used to match the photodiode's light intensity is known as ZnSe. It can be used in X-ray and gamma radiation detectors. ZnSe scintillator has a distinct design.

Shipping Zinc Selenide Zinse Powder - Packing and Shipping
Zinc Selenide ZnSe Powder packaging: Vacuum packing, 1kg/bag and 25kg/barrel or as required
Zinc Selenide ZnSe Powder shipping: There are two options: express shipping or sea freight.

Zinc Selenide ZnSe Powder Properties

Other Titles Zinc Selenide, IR grade zinc selenide, Zinc monoselenide,
Stilleite, selanylidenezinc, selenoxozinc, Zn-Se, Zn-SE-04-P, Zn3Se2
Compound Formula ZnSe
Molecular Weight 144.35
Appearance Solid crystalline, light yellow
Melting Point 1520-1525 degC
Solubility In Water 0.01g/100g Water
Density 5.27 g/cm3
Purity 99.90%
Particle Size granule, -100mesh
Boling Point N/A
Specific Heat 340 J/kg-K
Thermo Conductivity 18 W/m-K (@ 298K)
Thermal Expansion 7.3 um/m-K
Young's Module 67.2 to 69 GPa
Exact 143.845668
Monoisotopic 143.845673 Da

Zinc Selenide ZnSe Pulp Health & Safety Info

Safety Notice Danger
Hazard Statements H301-H331-H373-H410
Flashing Point N/A
Hazard Codes T,N
Risk Codes 23/25-33-50/53
Safety statements 20/21-28-45-60-61
Transport Information UN 3283 6.1/PG2
WGK Germany 3

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

TRUNNANO is a reliable supplier for high purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…