Cobalt Phosphide (also known as Co2P) is gray powder. It has a melting point of 1386. It's soluble in nitric and aqua regia but not water.
Purity: 99.99%
Particle Size: 60 mesh
About
Cobalt Phosphide Co2P Powder
:
Cobalt Phosphide, a gray spiculate. Its relative densit (15) is 6.14. The melting point of cobalt phosphide is 1386. It is insoluble in nitric acids, aqua regia and cobalt. The intercalation compound cobalt-phosphide is (CO2P), which forms when a source of phosphorus enters the cobalt lattice. The use of cobalt-phosphide is possible in the following areas: magnetism; lithium battery anode materials; hydrogenation catalysis, photocatalytic decay, and others. Cobalt Phosphide is an excellent semiconductor material that has low bandgaps, good thermal stability and strong electrical conductivity. These characteristics are essential for the production of an effective water decomposition catalyst, which is a form of stable, efficient and inexpensive transition metal catalyst. Tatayoung has been a reliable global partner.
Cobalt Phosphide Co2P Powder
Source
. You can send us an inquiry regarding the latest.
Prices starting at
Cobalt Phosphide
Anytime.
Cobalt Phosphide Co2P Pulp Powder Product Performance:
Cobalt Phosphide Co2P Pulp has high purity, small size distribution, high temperature strength, high fracture resistance, chemical resistance and low density.
It is insoluble in nitric and aqua regia. However, it is insoluble in water. This is done by heating cobalt phosphide and red-phosphorus in vacuum tubes to between 650–700°C.
Technical Parameters of Cobalt Phosphide Co2P Pulp:
Product name
|
MF
|
Purity
|
Size of the particle
|
Melting Point
|
Volume Density
( g/cm3 )
|
The color of the sky
|
Cobalt Phosphide
|
Co2P
|
99.99%
|
-60 mesh
|
1386
|
6.14
|
Gray
|
It is simple.
Cobalt Phosphide Co2P Powder
Produced?
The phosphorous source can be used to make cobalt phosphide. There are four methods. First, trityl phosphorus, also called TOP, is used to create phosphates. These phosphates can be synthesized in organic combinations by the thermal decomposition (or oil bath) method. It is possible to produce cobaltphosphate nanowires by using tri octylphosphorus as the source of phosphorus in the Ullmann process. A second reason is that hydrogen reduction is easier for metal phosphates. The phosphorus bond energy is higher than the oxygen bond energy. If you are looking to eliminate the keys, oxygen and phosphorus must be destroyed. The high temperature of the sintering process results in the formation large grains. A third option is to use a simple and mild hypophosphite method, which involves heating the sodium hypophosphite at high temperatures (300-4000) and in situ generation of toxic HP3. This will decrease the metal source. Fourth, element phosphorus was used to make the metal-phosphide under hydrothermal conditions (170-220). As a source of element phosphorus the elements had yellow phosphorus (white phosphorus), red phosphorus (red phosphorus) and yellow phosphorus (red phosphorus). This could lead to the aggregation of prepared cobalt-phosphide, and therefore, it was not possible to control its size or composition.
Applicaciones
Cobalt Phosphide Co2P Powder
:
The cobalt-phosphide is used in magnetic, battery anode, photocatalytic and hydrogenation. Cobalt Phosphide is an excellent semiconductor material that has high chemical stability and low bandgap. The high performance makes it an ideal choice for making a water decomposition catalyst. It's a type of stable, efficient and affordable transition metal-phosphating agent.
Shipping Cobalt Phosphide Co2P Pulver:
We offer many packing options that are dependent on the amount of cobaltphosphide CO2P powder.
Packing of cobalt phosphide CO2P powder:
You can vacuum pack 1kg per bag, 25kg/barrel or according to your requirements.
Shipment of cobalt phosphide powder Co2P
You can have your order shipped by air or by sea.