Oxide Powder

  • 0
  • 0

High Purity Zirconium Oxide ZrO2 powder CAS 1314-23-4,99.9%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Zirconium dioxide (chemical name: ZrO2), is zirconium's main oxide. It's a powder with an odorless, white color. Purity: 99.5%
Pebble size: 20nm - 200nm

Zirconium oxide ZrO2 powder:
Zirconium dioxide also known as Zirconia or zirconium , is a white-crystalline oxide of zirconium . The mineral baddeleyite, which is a monoclinic crystal structure, is its natural form. The cubic zirconia dopant stabilized cubic structured zirconia can be made in different colors and used as a gem or a replica of a diamond.
Zirconia does not react chemically. It can be slowly attacked with concentrated sulfuric acid or hydrofluoric. If heated, it becomes zirconium carbonide. If heated in chlorine with carbon, it becomes zirconium trichloride.
Zirconiumoxid has been one of the most researched ceramic materials. ZrO2 is a monoclinic crystal at room temperature, but transitions to tetragonal at higher temperatures. When the structure shifts from tetragonal, monoclinic or cubic it causes large volume changes. It cracks upon cooling.
It is possible to identify three types of phases. It is common to see higher symmetry at higher temperatures. The cubic phase is stable for a very small number of the ytrium and calcium oxides. Cubic is also the case for rare minerals like tazheranite (Zr Ti and Ca)O2. TiO2, with six-coordinated phases of titanium, is cubic. Monoclinic Zirconia has seven coordinated zirconium center. This is due to the difference in size between the zirconium and titanium atoms.
ZrO2 bands are dependent upon the phase of the material (cubic or tetragonal), and methods used to prepare it. The typical values range between 5-7 eV. Tetragonal zirconia Polycrystal (TZP) is an exceptional case of zirconia. It is made up of the metastable phase of the tetragonal phase.

If you'd like to order Zirconium O2 powder, please send us an inquiry.

Zirconium oxide ZrO2 powder performance:
Inactive zirconium dioxide chemically has high melting points, high resistanceivity and low coefficients of thermal expansion. This makes it an important ceramic insulating material, high temperature resist material and ceramic sunscreen. raw material. The band gap lies between 5-7eV and 5-8eV.

Technical Parameters of Zirconium Oxide ZrO2 Powder :
Zirconium Oxide particle size: 200nm
Zirconium Oxide crystal monoclinic:
Zirconium Oxide purity: 99.9%
Fe2O3 content: <=0.003
SiO2 content: <=0.003
TiO2 content: <=0.03
Al2O3 content: <=0.002
Na2O content: <=0.001
CaO content = =0.002

How does Zirconium oxide ZrO2 Powder get made?
Stabilly Zirconia is used as an industrial refractory and is where most electric mete comes from. To the zircon fuse, carbon and stabilizable Calcium oxide were combined. The solution was used for the production of a solid solution. After that, stably Zirconia was made. The majority of stable, partially stabilized zirconia used for fine ceramics was prepared using wet.
It is also the most popular and widely used method. Pure water is used to dissolve the purified chloride Zirconium. Then, filter the insoluble matter and adjust the concentration of the solution. Add the cerium chloride solution or other rare earth metals, as well as ammonia Water Medium, for precipitation. Hot water was used to wash the precipitate. Then it was dried, filtrated and calcined. You can make ultrafine zirconia dust by treating the calcined material.
To control how much stabilizer is used, partial stabilization of zirconia can be done. This is necessary to maintain stability. Partially stabilized zirconia is strong and resistant to thermal shock, so it has a wide range of applications in structural ceramics.

Zirconium Oxide ZirO2 powder:
Metal zirconium or zirconium compound, fire bricks/crucibles, high frequency ceramics, and abrasive material, as well as ceramic pigments. Zirconates can be used for piezoelectric ceramics products, daily ceramics, and precious metals melting Zirconium brick and tube.
Refractory
Zirconia fibers can be described as a polycrystalline refractory fibre material. Because of its high melting temperature, non-oxidation, and other excellent high-temperature characteristics, ZrO2 fibers have higher use temperatures that other refractory fibres like alumina, mullite, or aluminum silicate fibers. Zirkonia fibers can be stored for extended periods in super high temperature oxidation conditions above 1500°C. The highest temperatures are as high at 2200°C and even 2500°C, where the fiber shape is maintained. Fiber material.
Gas turbine
A plasma spray zirconium oxide thermal barrier coating has made tremendous progress on-air gas turbines. This has been applied to turbine sections of gas turbines in a limited range. The coating is capable of reducing the temperature from 50 to 200°C of the hot-cooled member. This can greatly improve its durability, temperature, and maintain it at a lower temperature. This improves the engine's performance.
Zirconium Oxide Ceramic Material
The refractive value of zirconia, which is also large and has high melting points, is very corrosion resistant, making it a popular choice for the kiln sector. The products of piezoelectric ceramic are filters, speakers and ultrasonic detectors. You can also find zircon tiles for daily use, industrial ceramic glazes and zirconium tube to melt precious metals. The nano-grade zirconia is also used to polish, glaze, and create high-temperature pigment matrix materials.
O there
Additionally, zirconia may be used for the production of enamel, white-hot gas masks and the white glass crucible. X-ray photography. Grinder material. The light source lamp is made from thick circuit capacitive material and piezoelectric crystal transducer formulations for infrared meters.

Zirconium Oxide powder storage conditions :
Zirconium Oxide ZrO2 should be stored dry, cool, and sealed.

Shipping and Packing of Zirconium oxide ZrO2 Powder :
You can pack it in two plastic bags with the inside.
Zirconium Oxide ZrO2 powder packing - vacuum packaging, 100g, 500g and 1kg/bag. 25kg/barrel. Or as you request.
Zirconium oxide ZrO2 Powder Shipping: could be sent out by sea or air as soon as payment receipt is received.


Tfmpage advanced materials Nano Technology Co. Ltd. (Tfmpage), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience providing high-quality chemical products, as well as Nanomaterials such as graphite powders, boride powders, nitride & graphite powders.
Send us an enquiry if you're looking for Zirconium oxide powder of high quality. (brad@ihpa.net)

Zirconium Oxide ZrO2 Powder Properties

Other Titles Zirconia, Dioxozirconium, zirconium, dioxo-, Zirconium dioxide, Zirconium White, Zirconium(IV) oxide, Zircosol, Rhuligel, Zirconic anhydride, Diketozirconium
1314-23-4
Compound Formula ZrO2
Molecular Weight 123.22
Appearance Powder White
Melting Point 2,715deg C (4,919deg F)
Solubility In Water N/A
Density 5680 kg/m3
Purity >99%
Size 325 mesh
Boling Point 4,300deg C (7,772deg F)
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Mass 121.895 g/mol
Monoisotopic 121.94531 Da

Zirconium Oxide ZirO2 Powder Health & Safety Info

Safety Notice Alert
Hazard Statements H315-H319-H335
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # ZH8800000
Transport Information NONH
Germany nwg

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

TRUNNANO is a reliable supplier for high purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…