High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

Chemical formula: Fe2O3. Iron oxide Powder amorphous, reddish or deep-red. Water insoluble, but soluble and soluble in both sulfuric acid (HCL) and hydrochloric Acid. It may be slightly soluble or insoluble in nitric acids. Purity: 99.5%
Particle sizes: 50nm,150nm

Iron Oxide Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is one the three major forms of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of three primary oxides found naturally in the mineral magnetite. It can be used to suspend iron dioxide in applications, biomedicine and agriculture. Pulsed iron oxide's advantage is its ability to be modified using a wide range of inorganic or organic compounds (such starch, polyelectrolyte, and non-ionic detergent), so it can be used in more applications. Magnet iron oxide can also be applied in biomedical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the application of iron dioxide on the macro-scale is important and has a high reactivity, it can also be spontaneously combustible when smaller quantities are available at the nano and micron scales. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulverin large quantities, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be red or reddish brown in color. Odorless. Water, organic acids, and organic solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: a (positive magnetic) or g (diamagnetic). The dry-produced product's fineness is usually less than 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.125.24. A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 flour:

TEST ITEMS H130 H190
Content Fe2O3>=% 96 96
105degC volatile matter <=% 0.9 0.9
Hydrotrope <=% 0.25 0.25
Water-soluble sulfate and chloride=% 0.18 0.18
Residue on Sieve (10um)mesh 0.45 0.45
Water suspension pH value 5.0-7.0 5.0-7.0
Oil absorption (ml/100g). 20 20
Color (as measured against the sample) Micro- Micro-
Tinting strength in percent 99 99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O3 are available. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous sulfurate solution with an excess sodium hydroxide. (The alkali excess should be 0.040.08g/mL). Once the ferric hydroxide colloidal solution has turned reddish-brown, you can then pass it in to create the iron oxide nucleus. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 75-85°C, the ferrous Sulfate reacts and forms iron oxide.
2. Dry method
Iron reacts with Nitric acid to produce ferrous nitrate. This is then cooled and crystallized. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as the primary feedstock in the iron (III) oxide and steel industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder known as "jeweler’s red", "red rouge" or just "roie" is an extremely fine form of the mineral. This is used to polish metallic jewellery and lenses. It has also been used historically as cosmetic. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for the exceptional finish that it can provide. Rouge slightly marries gold and makes it look better. The rouge can be sold in powder or paste form. It is also laced on polishing cloths and solid bars with a grease binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", and 101. Some of these, like Pigment Red 101 or Pigment Brown 6, can be used as pigments. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetic use by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage media. This included magnetic disks (used to store data) and magnetic cassettes (used in audio/video recording and data storage). The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or using alternate crystal phases like b-Fe2O3.
6. Me dicine
Calamine lotion, which is used to relieve mild itching, is composed mainly of zinc oxide. This acts as an astringent. The active ingredient in the product, iron(III), works as an antipruritic. This is what gives the lotion its pink color.

Iron Oxide Fe2O3 Powder Storage Conditions:

Iron Oxide Fe2O3 Powder should be kept in a dry, cool environment. It should not be exposed to air.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in two plastic bags with the inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g, or 1kg/bag at 25kg/barrel. Or as you request.
Iron Oxide Fe2O3 powder shipping shipment: can ship out by sea or by air as soon as you receive payment receipt.


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical materials. They have over 12 years of experience providing nanomaterials such as graphite powders, sulfide powders, and boride.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)

Iron Oxide Properties

Other Titles Red iron oxide and micaceous ironoxide, ferric oxide, iron oxide, iron powder, Fe2O3
1309-37-1
Compound Formula Fe2O3
Molecular Weight 159.69
Appearance Powder in reddish-brown
Melting Point 1566 degC
Boiling Point N/A
Density N/A
Solubility of H2O Insoluble
Exact Matrix 159.855 g/mol

Iron Oxide Safety & Health Information

Signal word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
Transport Information NONH

Inquiry us

NEXT Oxide Powder

Our Latest Products

High Purity Cadmium Telluride Powder CdTe Cas 1306-25-8, 99.99%

Cadmium Telluride's chemical formula is CdTe with a molecularweight of 240.00. It is important as a semiconductor material of the group II-VI.Particle Size: -80mesh and -100mesh Purity: 99.99% Cadmium Telluride powder CdTe Powder: Cadmium tellur…

High Purity Zinc Telluride Powder ZnTe Cas 1315-11-3, 99.99%

Zinc Telluride belongs to the Group II-VI group and has the chemical composition ZnTe. Due to its broad bandgap zinc telluride can be used in semiconductor manufacturing.Particle Size: -80mesh and -100mesh Purity: 99.99% Zinc Telluride Zinc Telluri…

High Purity Antimony Telluride Powder Sb2Te3 Cas 1327-50-0, 99.99%

Antimony telluride has the chemical formula Sb2Te3. It is a topological insulater.Particle Size: -80mesh and -100mesh Purity: 99.99% Antimony Telluride sb2Te3 powder Chemical formula of antimony telluride: Sb2TE3.Molecular Weight 626.30.Gray So…

0086-0379-64280201 brad@ihpa.net skype whatsapp