VN powder (vanadium nutride) is also known. This important additive is essential to the vanadium alloy.
Vanadium Nitride VN Pulp :
Vanadium nitride (VN)
This is a combination of vanadium, nitrogen.
Vanadium nitride
The new alloy additive known as vanadium/nitrogen alloy is capable of replacing ferrovanadium for the manufacture of micro-alloyed stainless steel. Two crystal structures are available: One is V3N which is a hexagonal crystal structure and has an extreme hardness. It also has an undetectable melt point. The other crystal structure is VN. This is a face-centered crystal structure and has a small hardness of approximately 1520HV.
Vanadium nitride
This is formed in the nitriding of steel. It increases wear resistance. A second phase of V2N can also be created during the nitriding procedure. Also known as vanadium, nitride.
VN
. VN contains a cubic rock-salt structure. Also, there is a low temperature form that contains V4 Clusters. The low-temperature phase occurs when the vibration energy of high-temperature NaCl structure phase falls below zero.
It's a superconductor with strong coupling. Nanocrystalline vanadium-nitride is capable of being used as a supercapacitor. These are the
Properties of vanadium-nitride
The stoichiometry is crucial for sensitive applications.
To receive the most current information, send us an inquiry
vanadium nitride price
You can buy here
Vanadium Nitride Powder
In bulk.
Vanadium Nitride Powder VN powder's Product Performance:
Vanadium nitride paste prepared by chemical vapor deposition.
Distribution of particle sizes, large mass production, and the possibility for a lot of uses with hard alloys, high surface activities, are all possible.
Can easily be dispersed in the alloy material.
Technical Parameters of Vanadium Nickel VN powder
Name of the product
|
MF
|
Purity
|
Particle Size
|
Certain Surface Area
(m2/g)
|
Volume Density
(g/cm3)
|
The color of the sky
|
vanadium nitride
|
VN
|
99%
|
5-10um
|
30.2
|
1.29
|
gray-black
|
Chemical Composition Vanadium Nitride Powder VN powder
VN
|
N
|
Si
|
Fe
|
Cr
|
99.5%
|
19.5%
|
0.04%
|
0.14%
|
0.004%
|
It is simple.
Vanadium Nitride Powder
produced?
Pre-reduction in the heating furnace is used to reduce a sample of carbon and ammonium metavanadate. Then, final reduction takes place. Following the completion of the final reduction, the sample will be cooled in the furnace. The temperature inside the heating furnace ranges from 650-670 to the maximum setting of 450-670. Heating furnace holding times are between 2 and 4 hours. This temperature and time can make the sample melt or hinder the reduction reaction.
Following the pre-reduction the primary reduction product is V2O3. The rest of the samples are VN and carbides. In the final process of reduction the sample will be kept at 1300-1500. In the heat preservation, both CO2 and CO2 are produced. After heat preservation, it is removed by the introduced nitrogen. VN is then obtained. The nitrogen flow rate during the reaction is 210-270mL/min. This nitrogen flow rate can both meet the kinetic requirements of the reduction process and also protect against the high temperature reaction caused by excess nitrogen. Reduce nitrogen and dispose of it
Vanadium Nitride VN powder applications
:
Vanadium nickel nitride is very wear-resistant and the quality of vanadium steel may be significantly improved by using nitriding.
A high-quality steel has excellent weldability due to its comprehensive mechanical characteristics, which include strength, toughness, thermal fatigue resistance and ductility. Addition of vanadium Nitride to achieve the same strength can reduce costs by 20%-40%.
You can use vanadium/nitrogen alloy in pipe, structural, and tool steel. Use vanadium/nitrogen alloy in high-strength and low-alloy Steel
This can be used to perform vanadium or nitrogen microalloying, as well as promote the precipitation and oxidation of carbon, vanadium, & nitrogen compounds in the steel. It also plays a greater role in grain refinement and settlement strengthening.
Addition of vanadium nutride to steel may improve steel's mechanical properties such as toughness, strength and thermal fatigue resistance.
Addition of vanadium-nitrogen alloy can reduce costs by saving 30-40% on vanadium additon. The vanadium-nitrogen alloy can be used for structural steel, tool and pipe steels, as well as cast iron.
High-strength high-alloy steel's vanadium/nitrogen alloy can perform both effective vanadium/nitrogen microalloying. It also promotes the precipitation and oxidation of nitrogen compounds and carbon in steel.
Packing and Shipping Vanadium Nickel VN Powder :
We offer many packing options, which depend on the amount of vanadium-nitride powder.
Vadium Nitride VN powder packaging:
You can vacuum pack 100g, 500g, 1 kg/bag or 25kg/barrel. Or as you request.
Ship Vanadium nitride powder VN
Could be sent by sea or air as soon as possible after receipt of payment.
Mis-asia advanced materials Nano Technology Co. Ltd. (Miss-asia) has over 12 years of experience as a supplier and manufacturer for super high-quality chemical products. This includes boride, nitride, graphite, sulfide, 3D printing powders, and more.
High-quality products are what you want
Vanadium Nitride
Pulver
Please feel free and contact us to make an enquiry. (
brad@ihpa.net
)