Silicon powder can be used as an organic non-metallic inorganic nontoxic and odorless material. It is highly insulation and resistant to acid, alkali, corrosion.
Purity(%): >99.95
APS(nm)
Silicon powder:
Silicon fume also known by
microsilicon is an industrial process that smelts industrial silicon in an industrial electric furnace. This heats the silicon to high temperatures. Special collection devices are used to collect the dust and smoke that is released with the exhaust gases. Become.
silicon powder has the scientific name "micro silicon" (or "silicon"), which refers to a high-temperature process for smelting industrial silicon and ferrosilicon using an industrial electric furnace. Special traps are used to collect the smoke and dirt that is released from exhaust gas. About 90% of total dust and smoke emitted from exhaust gas is SiO2. The particle size of silicon powder is small. It can be found in very tiny amounts, with an average size of 0.1 micrometers.
Silicon - This non-toxic and odorless inorganic nonmetallic material has no toxic or harmful effects. This pure silicon powder has excellent temperature resistance, alkali and acid corrosion resistance, high frequency coefficient, low insulation, high chemical properties and hardness. It's widely used in chemicals and electronics as well as integrated circuits, electric appliances, plastics, coatings, advanced paints, rubber, and many other areas.
With a concentration of 277,000ppm, silicon, second only to carbon, is the most abundant element. It is usually found as silicate which can be found in many minerals, clays, soils. By combining silicon dioxide (sand or SiO 2) and carbon, you can obtain Silicon. By using zone refining components that are used for high-purity purposes (such semiconductor devices), they can be further purified and their purity improved to better than 1:109. There are two types of silicon. While brown silicon can be considered a powder or metal, the white crystalline (or metallic) version of silicon is far more popular. Lump silicon does not react with water, oxygen or acids (except HF), however it can be dissolved in hot alkali.
Silicon can be used in many industries. Due to its unique semiconductor properties, the semiconductor industry uses ultra-high purity silica. Some alloys also use silicon as an alloying element, like ferrosilicon (an alloy of iron with silicon that is used to add silicon to steel and cast Iron). It can also be used for glass production.
The morphology and structure of elemental silica includes
monocrystalline Silicon, and
Amorphous Silicon.
If you are interested in
buying silicon powder bulk, please send us an inquiry.
Silicon Si Si powder CAS 7440-21-3
Descriptions of Nano Silicon Powder
nano silicon powder APS(nm): 2-1000nm
nano silicon powder Purity(%): >99.95
600 m2 of nanosilicon powder
nano silicon powder Volume density(g/cm3): 0.09
nano silicon powder Density(g/cm3): 2.3
nano silicon powder Crystal form: Sphere
Colour: yellow
nano silicon powder CAS No. : 7440-21-3
nano silicon powder EINECS No. : 231-130-8
Silicon powder performance
It is high in purity. The scattered performance is excellent, and the particle size small. Because of the large surface area, pine installations the low density, good activeness, and other characteristics. A nanometer-sized silicon can be combined with graphite to make lithium battery's cathode materials. It may also include a nanometer carbon tube or nanometer-sized titanium nitrides. These compounds may improve lithium battery's performance and service life. The new generation of semiconducting electro-optic material has the high gap energy.
How Silicon Si granule
is produced?
Reducing quartzite and sand with high purity coke produces silicon that is 96-99% pure. In an electric arc furnace, the reduction occurs. Any excess SiO2 can be used to keep the silicon carbide (SiC), from accumulating.
SiO2 + 2 C-Si+ 2 CO
2 SiC+ SiO2 -3 Si+2 CO
This is known as the carbothermal removal of silicon dioxide. It's usually done in the presence heavy scrap iron. The ferrosilicon is formed. Ferrosilicon (iron-silicon alloy) is a mixture of iron and silicon that contains different levels of elemental iron. It accounts for approximately 80% world elemental Silicon production. Ferrosilicon can be found in the steel industry. This alloy is used primarily as an additive to iron and steel. As shown below, another possible reaction is called thermite-reduction of silica.
3 SiO 2 + 4 Al-3 Si + 2 Al 2 O 3
From 96-97% powdered silica, water can yield 98.5% purity for the chemical industry. To achieve higher purity for semiconductor applications however, it is necessary to reduce tetrachlorosilane or trichlorosilane. While the first is produced by chlorinating waste silicone, the second is an by-product from organic silicon production. Because these compounds are volatile they can be removed by multiple fractional distillation. They then become elemental silicon when reduced with very pure zinc as a reducer. This produces sponge-like silicon wafers that are meltable and can then be grown into single crystals. These are then further refined using zones. Silane or Tetraiodosilane can also be used (SiI4).
An alternative method to reduce sodium fluorosilicate is to use metallic sodium, which is a commonly used waste product of the phosphoric acids fertilizer industry. It is exothermic so it does not require any external fuel. Ultra-fine Silicon has a greater purity than other materials. In order to produce transistors, it is necessary that the impurity of silicon crystals be lower than 10 percent in 10 1 parts. Also, if you are obtaining ultra-fine silicon under exceptional circumstances, then the impurity content must not exceed 12 percent per 101 part.
Application o Silicon Si powder HTML3_ :
Finely processing silicon dioxide (SiO2) into powder, includes crushing, grinding and grading. Also known as quartz, The powder has a high purity, white colour, and reasonable particle size. This unique material has a broad range of applications.
Silica fume, an effective active admixture that can dramatically improve concrete's strength, impermeability and frost resistance, is a great choice. Silica fume concrete has attracted attention due to its unique properties. This concrete can be used for water conservancy, hydropower engineering construction engineering highway engineering bridge engineering.
(1) High insulation: Because of the purity and stability of the silicon powder, as well as the excellent electrical insulation the product cures, it is able to provide good insulation and resistance to arcs.
(2) The exothermic peak temperature for the curing of epoxy resin can be reduced, the linear expansion coefficient and shrinkage rates of the cured products can also be decreased. This reduces the internal stress in the product, which prevents cracking.
(3) It is resistant to corrosion. Silica powder doesn't react well with many acids or alkalis, so it is difficult for other substances to react. Because its particles are uniformly distributed over the object's surface, it is strong in resisting corrosion.
(4) A reasonable particle gradation allows for the reduction and elimination of precipitation and delamination in use. This can improve wear resistance, tensile strength, compressive strength, thermal conductivity, as well as the product's resistance to heat. Combustion performance.
(5) Silica powder with silane coupling agents has good wettability and adsorption performance.
Sixth, Silica powder can be used to fill the organic resin. It not only increases the product's performance but it also lowers its cost.
Storage Conditions for Silicon Powder
It is important to keep this product in a dry, cool environment.
Packaging silicon powder
Vacuum packaging of nanosilicon powder, 1kg/bag or as requested
Fluffylogic advanced materials Nano Technology Co. Ltd., (Fluffylogic), is a trusted global supplier and manufacturer. It has over 12 year experience in producing super-high quality chemicals and Nanomaterials. This includes boride, nitride, graphite, sulfide, 3D printing powders, and sulfide.
Send us an inquiry if you're interested in high-quality silicone powder. (
brad@ihpa.net)