High Purity Zirconium Diboride powder ZrB2 CAS 12045-64-6,99%

Zirconium-boride is an organic chemical compound with the formula ZrB2. In nature, grey hard crystals. Zirconium Boride has three main components: zirconium Monoboride, zirconium Diboride and zirconium Triboride. Purity>99%
Particle Size 325 Mesh

Zirconium Diboride, ZrB2 powder:
Zirconium-boride, is a chemical compound. Zirconium-boride's chemical formula ZrB2 is. Nature gray hard crystals. Three components make up zirconium boride: monoboride, diboride, and tribromide. Only zirconium Diboride can be stable across a large temperature range. The main industrial production relies on zirconium. Zirconium dioxide comes in hexagonal or gray crystals, powder, and has a relative density (density) of 5.8. The melting point is 3040degC. High-temperature resistant, high strength in both room temperature and at high temperatures. Low resistance, high resistance, and anti-oxidation. The melting point is around 3000degC. With metallic luster.

Zirconium boride ZrB2 consists of a hexagonal-shaped ceramic material. ZrB2 is a high-temperature ceramic with a melt point of 3246degC. With a density of only 6.09 g/cm3 and a high temperature strength of over 1800degC (the density measured may be higher because ha impurities are present), it is ideal for high-temperature applications in aerospace, including hypersonic or rocket propulsion.

It is a ceramic that has a high thermal conductivity, good thermal shock resistance and similar characteristics to titanium diboride. ZrB2 has a high thermal conductivity of >50 W/m/K, is inert to molten steel, has good thermal shock resistance and can pass EDM ceramic molding.

ZrB2 components are typically hot-pressed by applying pressure to heated powder and then machining to shape. ZrB2 is unable to sinter due to the covalent properties of the material, and the surface oxides. The surface oxides present will cause the crystal grains to be coarser, before they become denser during the sintering procedure. ZrB2 may be sintered without applying pressure. It is possible to sinter ZrB2 without pressure.

Please send us an email to receive the most recent zirconium dioxide price. If you're interested in purchasing Zirconium Difboride Powder by bulk, please feel free to do so.

Properties Of Zirconium Diboride Powder ZrB2 Powder CAS 12045-64-6
Formula Molecular ZrB2
Molar mass: 112.85 g/mol
Appearance: grey-black powder
Density: 6.085 g/cm3
Melting point: 3246 degC
Insoluble: Solubility of water
Hexagonal crystals: hP3
Space group: P6/mmm No. 191

Zirconium Diboride ZrB2: Features
TiB2, ZrB2, HfB2, VB2, NbB, NbB2, TaB, TaB2, CrB2, Mo2B5, W2B5, Fe2B, FeB, CoB, Co2B, NiB, Ni2B, Ni2B, LaB6, UB4, UB2.
Zirconium diboride is a highly covalent ceramic material that has a hexagonal structure. ZrB2 is a ceramic ultra-high temperature (UHTC), with a melt point of 3246°C. The combination of its low density, 6.09g/cm3, and good high-temperature strength make ZrB2 a suitable candidate for high-temperature aerospace applications. This is a ceramic with unusually high thermal conductivity and electrical conductivity. These properties are shared by isostructural hafnium dioxide and titanium diboride.

How are Zirconium Diboride Powder ZrB2 Pulse manufactured?
By metal thermal reduction, ZrO2 or HfO2 is reduced to respective diboronsilanes. React with cheap precursors and follow the reaction sequence:

ZrO 2 + B 2 O 3 + 5Mg-ZrB 2 + 5MgO

The materials required for the boron thermal reaction and stoichiometric reaction are more expensive. Prepare ZrB2 for at least one hour at a temperature greater than 1600degC by the following reaction

2ZrO2 + B4C + 3C-2ZrB2

This method is required to have a slight surplus of boron as some boron gets oxidized by the boron-carbide reduction process. ZrC was also produced by the reaction. However, when the reaction is performed with an excess of B4C of 20-25%, the ZrC disappears, and only ZrB2 will remain. UHTC produced at the lowest synthesis temperatures (1600degC), will be of finer dimensions with better sinterability. To promote oxide reduction and diffusion, boron carbide must be ground prior to boron-carbide reduction.

You can disperse ZrO2 on the polymer precursor to boron carbide before reaction. in. Heat the reaction mixture up to 1500degC to form boron carburide and carbon, followed by the reduction of ZrO2 into ZrB2.

If the substrate temperature is greater than 800degC the gas phase is used for the reduction of the zirconium-boron-tetrachloride vapors. Recent developments have allowed alternative ZrB2 layers to be produced by physical vapor deposit.

Zirconium is diboride, which has high hardness and thermal conductivity. Zirconium is used for a variety of industries including the ceramic refractory industry, nuclear industry aerospace industry and military industry. Zirconium can be used for a surface coat on rolling balls and solid materials.

Carbon fiber reinforced zirconium boride composites have a high density. Silicon carbide fiber reinforced zirconium boride composites, however, are brittle with catastrophic damage.

Zirconium diboride can be used in thin-film electronics for sensors and actuators that operate at high temperatures. This is because ZrB2 has metal-like properties and a melting temp of 3245degC.
Zirconium Diboride ZrB2:
The zirconium dioxide powder is used for the manufacture of ceramics.
(2) Zirconium diboride can be used as neutron absorber.
Use zirconium powder as an abrasion resistance coating.
The zirconium dioxide powder is suitable for use as a crucible liner and in anticorrosive chemicals.
As an antioxidation material, zirconium powder diboride can be used.
(6) Zirconium Diboride Powder can be used to make a refractory substance, in particular for the purpose of anticorrosion.
(7) Zirconium Diboride Powder can be used to enhance the thermal performance of an additive.
Use zirconium-diboride powder for high-temperature resistance.
(9) Zirconium diboride can be used in a special dope to protect against corrosion, high temperatures and oxidation.

Store Zirconium Diboride Powder ZrB2 in the following conditions:
The ZrB2 ZrB2 is affected by damp reunion. Therefore, it should be packed in vacuum and kept in a dry and cool room. ZrB2 Powder should not be exposed to stress.

Shipping & Packing of Zirconium Diboride ZrB2:
The packaging depends on the amount of zirconium dioxide ZrB2 powder.
Zirconium diboride ZrB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Zirconium Diboride ZrB2 shipping: can be shipped out via air, sea or express as soon as payment receipt.

Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years' experience in providing high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D printing materials, etc.
We are happy to answer any questions you may have. (brad@ihpa.net)

Zirconium Diboride Properties

Alternative Names ZrB2 powder is zirconium-boride.
CAS Number 12045-64-6
Compound Formula ZrB2
Molecular Mass 112.8
Appearance Gray to Black Powder
Melting Point 3246 degC
Boiling Point N/A
Density 6.09 g/cm3
Solubility In H2O N/A
Exact Mass 111.923315 g/mol

Zirconium Diboride Health & Safety Information

Sign Word Warning
Hazard Statements H228
Hazard Codes The following are some of the most effective ways to increase your chances of success:
Risk Codes N/A
Safety Declarations N/A
Transport Information UN3178/PG III

Inquiry us

NEXT Boride Powder

Our Latest Products

High Purity Lithium Nitride Li3N Powder CAS 26134-62-3, 99.99%

TRUNNANO is a reliable supplier for high purity Lithium Nitride Li3N Powder CAS 26134-62-3, 99.99%.…

High Purity 3D Printing Aluminum Based Alloy AlSi7Mg Powder

TRUNNANO is a reliable supplier for high purity 3D Printing Aluminum Based Alloy AlSi7Mg Powder.…

Hollow Glass Sphere, Hollow Glass Beads, glass sphere balls

TRUNNANO is a reliable supplier for Hollow Glass Sphere, Hollow Glass Beads, and glass sphere balls.…

0086-0379-64280201 brad@ihpa.net skype whatsapp