• 0
  • 0

Introduction to Titanium Carbide TiC Powder

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

The Introduction of Titanium Carbide TiC Powder

Titanium carbide or TiC is a classic transition metal carbide with NaCl-type Cubic crystal structure. a high melting point, hardness, high Young's modulus, excellent durability chemically, wear and corrosion resistance, and excellent thermal and electrical conductivity. Thus, it is able to be used in a wide range of applications and is a good candidate for cutting tools parts, aerospace components and wear-resistant coatings, foam ceramics and infrared radiation materials.

Technologies of Titanium Carbide TiC Powder

1. Used to make various multiphase materials

Titanium carbide clays are super hard tool materials TiC and TiN, WC, and A12O as well as other raw materials that are made out of multi-phase ceramics These materials have a extremely high melting points, high hardness and exceptional chemical stability. is the material of choice for cutting tools, wear-resistant pieces however, they possess excellent electrical conductivity and is the most commonly used material for electrodes.

Cutting tool material: Because of some percentages of TiC hard particle dispersion in the matrix, composite cutting tools don't just to improve the hardness as well, but also, to a some extent, enhance the strength of the fractures, much higher than the standard cutting capabilities a great deal. A12o3-tic system-based ceramics could be used as armor material. As a tool material, the hardness is much higher than (C, N), and Ti(C, N) because of N to use it on steel as well as other cutting materials friction coefficient greatly reduced. Brings many advantages to cutting. By combining the advantages of Ti and (C, N) to create multiphase ceramics, a highly effective tools material can also be prepared.

2. They are also used for coatings.

Diamond coating: This manufacturing technique used to make diamond tools is typically the impregnation of powder metal using the method. Because of the large interfacial energy between diamond and the general alloy or metal the diamond's surface can't be penetrated by alloys or metals that have a low melting temperature and bonding efficiency is not great. In recent times, many researchers have conducted a variety of research on enhancing the bond strength between diamond and metal matrix. The method of active metal is the most popular in that it involves the addition of some titanium to strengthen the bond between metal and vanadium or chromium. other active metals. When used in the liquid phase sintering where the active material is high carbon compound forms elements, and the diamond affinity is significant, and easy to improve the surface of diamond in order to create the metallurgical interaction of metal bond and diamond. The strength of the bond is affected by the amount of active metal, sintering temp and time as well as other variables. It is necessary to achieve an extrusion of the binder in order to achieve the enrichment of active metal towards the interface as this method isn't suitable for hot press sintering of metal and diamond powder within a short solid phase.

3. Utilized to prepare foam ceramics

as a filtering agent, ceramics are able to effectively eliminate inclusions throughout all types of fluids The mechanism of filtration is Adsorption and agitation. The filter needs the chemical stability of the material particularly in the metalurgical industry with a high melting filtering. This type of material can become oxide most of the time, but it also has the ability to adjust to the filter of the metal melt, which is the primary goal of thermal shock resistance. Titanium carbide foam ceramics have greater strength, harderness, electrical conductivity and heat, as well as resistance to heat and corrosion in comparison to oxide ceramics.

4. It is used in the infrared radiation of ceramic materials

Titanium carbide is a kind of intermetallic compounds, which have generally shows good chemical stability with no changes in valence state in the system. at a high temperature decrease in the process of preparing samples. The components of titanium ions show a delay effect to manifest, and are aimed at melt into the structure of the cordierite the structure. This is followed by a change in the structure. In comparison to a single component its radiation properties of this material is evidently improved, which is conducive to the application in the area of high temperatures.

Main Manufacturer of Titanium Carbide TiC Powder

We are a reliable global chemical material supplier & manufacturer with more than a decade of experience manufacturing high-end chemicals and Nanomaterials, such as silicon powder, nitride powder, graphite powderand zinc sulfide, calcium nitride, 3D printing powder and more.

If you're in the market for premium titanium carbide TiC Powder Please feel free to contact us to send us an inquiry. (

Inquiry us

  • tags

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

TRUNNANO is a reliable supplier for high purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…