News

  • 0
  • 0

TR75 7.5 kW CLC Foam Generator for Lightweight Concrete

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Commodity prices are on track for their biggest rally in more than a century, while fixed-income assets have seen their longest run of outflows as the war in Ukraine adds to inflationary pressures in the global economy emerging from the coronavirus lockdown, according to Bank of America.

"Commodity prices this year are on track to record their biggest gains since 1915." the bank said in its weekly briefing. They cite many factors, such as pandemics, lockdown, civil strife, wars, excessive monetary and fiscal stimulus, and supply chain disruptions, that have led to "historically" high inflation.  

By the same token, it said government bonds were heading for their worst year since 1949, and "negative-yielding bonds will quietly disappear" from the market as central banks embark on a monetary tightening cycle and raise interest rates to tame soaring inflation.  

The prices of many commodities like the Concrete Foaming Generator are expected to increase in the future.

Foam Concrete Machine is the core equipment of foam concrete production, which has a significant impact on the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output but more importantly, the quality of the foam produced is outstanding. TR75 portable foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.

 

Parameters of TR75 CLC Foam Generator

ModelTR75
Maximum foam output(m3/h):7.5
Motor voltage(V) : 380
Work rate(KW):7.5
Foaming speed(L/m):300
Bubble bleeding(kg/m3):70
Dimensions(cm):1200*700*1000
Weight(kg):300


Benefits of TR75 CLC Foam Generator:

(1) The foam produced is uniform, which helps improve the strength and thermal insulation performance of foam concrete. The foam is uniform, the foam is not easy to be broken in the slurry, the amount of foam is small, and a high closed cell ratio can be formed. The foam is evenly distributed in the mud, which can increase the strength of the foamed concrete;

(2) Low foam density. TR75 portable foam generator has low foam density and saves foaming agent. In the case of the same dilution factor of the foaming agent, the thickness of the foam produced by this machine is 20-40 g/L, and different foaming agents have various dilution factors;

(3) Simple operation, low failure rate, precision parts are selected to reduce the use of wearing pieces, the failure rate is lower, the service life is longer, and one-button control is realized.

 

Note:

(1) The foaming liquid suction pipe is about 1.5m long. Be careful not to remove the filter to prevent impurities from blocking the pump;

(2) Foaming volume: The maximum foaming volume is about 100L/min. The foaming agent used will affect the amount of foaming. The value of 100L/min is the value measured after the company's foaming agent is diluted 60 times;

(3) About making foam concrete: You can use a mixing bucket to make pulp, and then directly foam the foam on top of the slurry. After stirring, the slurry can be mixed with foam to form foam concrete. Take care to minimize the foam stirring time and stir at low speed.


Model:TR75
Maximum foam output(m3/h): 7.5
Motor voltage(V) : 380
Work rate(KW): 7.5
Foaming speed(L/m): 300
Bubble bleeding(kg/m3):70
Dimensions(cm): 1200*700*1000
Weight(kg):300

The war in Russia and Ukraine is roiling global financial markets. Russia and Ukraine are important commodity suppliers in the world, so their conflict is bound to make a full impact on the global commodity supply. In view of this, the price of the Concrete Foaming Generator may continue to rise in the future.

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity 3D Printing Alloy CoCrW Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

TRUNNANO is a reliable supplier for high purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…