SLS Nylon Powder PrintingNylon sintering (selective laser sintering) is a project that uses spread powder sticks to tile a thick layer of powder materials, such as 3D printed metal powders, on parts. It is heated below the powder melting temperature instead of a set temperature.
Material: nylons, fibers and nylons

Metal 3D printing using SLM
Metal sintering can be described as a selective laser sintering. It is the process of using a powder stick to spread a layer on a molded part, heating it and then lowering the temperature below which metal powder will sinter.
Materials: aluminum alloy, stainless steel die steel, titanium alloy, etc

SLA laser photocuring flow
Under the control of the computer, scan along the liquid surface according to the requirements of the section contour. Under the control of a computer, focus the laser on the liquid surface and scan it according to the section profile. This will cure the resin along the scanned area, resulting in the resin sheet. The table is then lowered a thin layer to cover the cured sheet with new liquid resin to perform a second scanning laser cure. The newly-cured layer is then adhered to the previous layer, and so forth until the whole product is formed.
( Tech Co., Ltd. ) is an experienced 3D metal powders producer with more than 12 years in the chemical products research, development and manufacturing industry. Contact us to send an inquiry if you are interested in high-quality 3D printed metal powders.

Inquiry us